How to Flash Xiaomi Redmi Note 3 via the Sp Flash Tool

How to Flash Xiaomi Redmi Note 3 via the Sp Flash Tool.Gadgets Produced by Xiaomi It has a lot of fans from Mi fans all over the world. The Xiaomi New Product is no exception, the Redmi Note 3.
Xiaomi Redmi Note 3 itself is divided into 2 models, Xiaomi Redmi Note 3 and Xiaomi Redmi Note 3 Pro. Of the two types of mobile phones have features and designs that are not much different. A fairly large screen measuring 5.5 inches with a Metal Body that is available in various types as well as the fingerprint found under the rear camera adds an elegant impression.

The Redmi Note 3 Pro is equipped with a 1.8GHz Snapdragon 650 processor, and the Redmi Note 3 itself is equipped with a lower processor, the Helio X10 MediaTek Flagship. besides the very striking difference above of these 2 types is none other than the SIM card slot and its camera.
There are some mandatory equipment that we must use. Like Kompute (here I use Windos 7) and a good USB cable / original (default recommendations from mobile phones). Next, download the files that you will be using, such as sp Flash tools, Mtk drivers and xiaomi Redmi note 3 Firmware below:

ROM: Xiaomi Redmi Note 3 Firmware:

Tool: SP Flashtool (SP_Flash_Tool_v5.1744_Win.zip latest version):

Download Smart Phone Flash for Windows

Download Smart Phone Flash for Linux

Move all files that have been downloaded into one folder for easy. Extract the file download and follow the instructions below.

First recharge your cellphone and make sure the battery is more than 70% to avoid dead during the flashing process
.
1. Install the Mediatek USB Driver.
2. Turn off the Xiaomi Redmi Note 3 (if the battery can be removed, take it off to make sure the              cellphone is completely off).
3. Open the SP Flashtool folder that you extracted earlier. Right-click on the flash_tool.exe file.          “Run as administrator”
4. Then select the “Download” Tab, make sure the Download-agent column is written:                              DA_SWSEC.bin.
5. Then open the Xiaomi Redmi Note 3 firmware folder. Search for Android_scatter.txt move it into        the Signed_bin folder.

6. Select “Scatter-loading” search and enter the file “Android_scatter.txt” in the “Signed_bin”           folder.
7. Then click Download on the SP Flash tool.
8. Hold Volume Down while connecting the phone to a computer with USB. Don’t release Volume         Down
9. The computer will automatically detect the handphone driver
10. When finished, the progress bar will start running. Don’t release Volume Down.
11. If the bar under the sp flash tool is yellow, release Volume Down.
12. And the flashing process is running.
13. Wait for the download to appear Ok download.

For more details, please see the video on how to flash Xiaomi Redmi Note 3 via the Sp Flash Tool below.

That was the tutorial How to Flash Xiaomi Redmi Note 3 via the Sp Flash Tool.

Hopefully useful,thanks.Don’t forget to click on the ad too.